Installation guide

STEP 1: Planning

• Measure the length of the area you want to install the lights on.
• Connect the led strip and the micro usb to the white case, the strip will turn orange.

           

STEP 2: Clean the surface  

• Use a rag or paper towel with rubbing alcohol to clean off any oil or dust on the surface.

 STEP 3: The Adhesive  

• Gently peel back about 3 inches of the plastic to reveal the adhesive. (make sure to not pull back the glue)

STEP 4: Proper Installation

• Start off with applying the beginning of the strip against the wall gently.
• Try staying as close to the corner where the wall and ceiling meet to make sure the lights stay in a straight line when applying them horizontally or vertically.  
• Ask a family member or friend to hold the other end of the led strip to make this part easier.

STEP 5: Powering Your led strip

• Connect the power supply to the led strip and plug it into the closest socket

STEP 6: Connect your phone to the led strip

• Follow the steps on the Installation guide.
• When problems occur please contact us and we will help you with your problem. 

Optional step: Take a photo or video

• As a small business we love seeing people using our product. So if you want to show us, send your photo's to @vitaleds (instagram) to be featured.